Skip navigation

Laptop

Webcam (Can be built into laptop)

Mouse/Keyboard (Will be disassembled for project)

Software:

  • Processing

Hardware

Resistors

  • 10 – 10 Ohm
  • 10 – 100 Ohm
  • 10 – 220 Ohm
  • 10 – 1K Ohm
  • 10 – 10K Ohm
  • 5 – 30K Ohm
  • 5 – 100K Ohm
Capacitors

  • 5 – 22pF Disk
  • 5 – 0.01uF Disk
  • 5 – 0.1uF Disk
  • 4 – 1uF Electrolytic
  • 4 – 10uF Electrolytic
  • 4 – 220uF Electrolytic
  • 4 – 470uF Electrolytic
LEDs

  • 10 – red
  • 10 – green
  • 10 – yellow
  • 2 – superbright red
  • 2 – superbright white
  • 2 – superbright blue
Switches

  • 1 – mini toggle
  • 1 – slide
  • 1 – Normally Open pushbutton
Semiconductors

  • 1 – Motor driver H-bridge (SN754410, aka L293)
  • 2 – 5V regulator
  • 2 – 3.3V regulator
  • 2 – NPN2222A transistor
  • 2 – 3.3V Zener diode
  • 2 – Darlington Transistor (TIP120)
  • 1 – photocell
  • 1 – thermistor
  • 1 – phototransistor
Misc

  • 3 – 10K potentiometer (breadboard mount)
  • 3 – 10K potentiometer (panel mount)
  • 3 – 6V DC motor
  • 1 – DC Powerline male connector
  • 1 – 9V Battery Snap
  • 1 – Solderless Breadboard
  • 2 – 2-position screw terminal block
  • 1 – parts box
  • 1 – 2-in-1 gearbox
  • 1 – tact. momentary switch, board mount
  • 1 – momentary switch, panel mount
  • 1 – AA batter holder
  • 1 – reed relay

Basic Tools:

  • Small 2-in-1 screwdriver
  • Diagonal cutter
  • Wire Stripper
  • Needle Nose Plier
  • 12V Voltage Adaptor
  • USB Cable A-to-B, 6 ft.
  • IC Extractor
  • Digital Multimeter
Advertisements
%d bloggers like this: